Product Description:
1.The vessel diameter range lies within 1000~5500 mm .
2.One set powered / One set idler / Electric control system
3.Customers can customize 150 ton self - aligning welding rotators to their specifications .
4.150 ton Self - aligning welding rotator can controlled by handbox and foot pedal rubber wheel or steel wheel following your repuire.
5.Self - aligning welding rotator is easy to operate .
Features:
1.Two unit fit up rotators for pipe end support.
2.Two conventional rotators for pipe turning.
3.Fit up welding rotator work for up /down adjust.
4 Conventional rotator work for motorized turning.
5. Fit up welding rotators is only idler turning.
6.Fit up rotators controlled by hydraulic pump.
7.Conventional rotators controlled by motor.
8.All rotators with wireless hand control box.
Technical Parameters:
| Model | HGZ-150 |
| Turning Capacity | 150 ton maximum |
| Drive Load Capacity | 75 ton maximum |
| Idler Load Capacity | 75 ton maximum |
| Adjust Way | Self aliging roller |
| Motor Power | 2*4KW |
| Vessel Diameter | 1000~5500 mm |
| Rotation Speed | 100-1000mm/min |
| Speed control | Variable frequency driver |
| Roller wheels | PU |
| Roller size | Ø500*280mm |
| Voltage | 380v±10% 50Hz 3Phase |
| Control system | Foot pedal 8m cable |
| Color | Customized |
| Warranty | One Year |
Applications:
1.Operator must be training of the operation technical ability knowledge, and carry on to the following important point to study in earnest, strictly forbid someone carry on various operation under blindness.
2.In the normal circumstance ,the installation of pipe welding rollers had better adopt the bolt to fix originally.
3.When finished installation, check whether tight firmware of each port loosens to move the phenomenon or not, if have, please tighten them immediately.
4.When welding , equipments must have the credibility to connect ground wire, to insure the safety,
5.Can't connect directly to roller , the in order to prevent damage bearings.
Support and Services:
1. We provide 12month guaranty period for the whole machine quality.
2. During this time, any issue proved because of the machine flaw itself,we would take the whole responsibility of it.
3. Except of the guaranty period,technical advisory support is available freely covering the whole using life of the machine.
4. Engineer service on user premises is also available for necessary.
Packing and Shipping:
1.The Pipe Welding Rotator will be securely packaged and shipped in a wooden crate.
2.It will be placed in an anti-rust coating for extra protection and then covered with a thick foam sheet.
3.The crate will be sealed with screws and nails to ensure that it is secure and will not be damaged in transit.
4.Once it is shipped, it will be tracked with a tracking code to ensure that it is delivered safely and on time.
5. All boxes are labeled with the product name and number, and the shipper's contact information.
7.The boxes are secured with zip ties or stretch wrap to ensure safe handling and delivery.
8.Each box is filled with packing air bags, or bubble wrap to protect the product during transit.
FAQ:
Q1: What is your product name?
A1: Our product name is Weldsuccess Pipe Welding Rotator.
Q2: Where is it made?
A2: It is made in China.
Q3: What certifications does it have?
A3: Our product has ISO/CE/CO certification.
Q4: What is the order quantity?
A4: The minimum order quantity is 1 set.
Q5: What is the price and payment terms?
A5: The price is negotiable and the payment terms are L/C, D/P, T/T. The packing is wooden case and the delivery time is 15 days. We can supply 5 sets per month.
